Diesel Oil pump set

Specifications
Maximum flow rate: 60 l/min
Maximum delivery head: 10 m
Motor power: 0.38 kW
Voltage: 230 V
Discharge connection: 1" x 1"
Power cord length: 1.5 m

APPLICATION:
The PO-2 CPN (230V) unit is designed for diesel fuel and other media with similar physical and chemical properties. The set includes the following components: a motor with a pump, a suction hose with a check valve, a discharge hose equipped with a dispensing nozzle, and a flow meter. All components are mounted on a base, creating a compact, portable device. The motor driving the pump operates on 230 V power. The pump comes with a factory-installed electrical cord and plug.

The set consists of the following components:
PO pump
Flow meter
Filter element
Dispensing nozzle with an automatic shut-off function
2 m suction hose with a suction strainer and check valve
4 m discharge hose
FEATURES AND BENEFITS:
Small, compact design
Lightweight
Maximum suction depth: 4 m
Easy to operate
Suitable for both permanent installation and temporary fluid transfer
Maximum temperature of the pumped liquid: 30°C Parameters of the pumped liquid:
density of the medium: below 0.9 g/l
viscosity of the medium: between 3.0–8.0 mm²/s
ATTENTION!
The pumps must not be used to pump flammable substances, such as gasoline or alcohols, or any other substances that pose an explosion risk during pumping.
The pumps must not be used to pump water.