Pellets mill 200 18hp for tractor drive

this pelletizer stems from its ability to process wood sawdust, straw, nutshells, rice husks, and paper. These are placed in a special die with Ø6 mm holes, where they are subjected to high pressure and temperature (60-80°C). Key product features:

Powered by a 10-18 HP PTO

Feed production: up to 300 kg/h

Sawdust production: 110-140 kg/h

Diameter: Ø199 mm

Pellet size: Ø6 mm (depending on the die used)

Cast iron and alloy steel

This reinforced model is equipped with two movable rollers, making it ideal for pelleting hardwood (beech, oak). The versatility of this pelletizer lies in its ability to process wood sawdust, straw, nutshells, rice husks, or paper. These are placed in a special die with Ø6 mm holes (depending on the die used), where they are subjected to high pressure and temperature (60-80°C). This produces pellets with an ideal consistency. Some materials require the use of special binders.

Powered by a 10-18 HP PTO, the pelletizer offers excellent performance.

It can produce up to 300 kg of feed per hour or up to 140 kg/h of wood sawdust.

A practical discharge chute made of galvanized sheet steel allows for pouring the finished pellets directly into bags.

Ease of use, efficiency, and the ability to use a variety of raw materials will undoubtedly make the Optimat pelletizer suitable for many farms.

The material to be pelleted must be dry, with a maximum moisture content of 18%. The diameter of the material must not exceed 3 mm. An additional cover at the inlet protects against the entry of larger and unwanted objects.

for tractor use