Product 6/10

 Previous 
 Return to the Product List 
 Next 

Grating, h 30mm 19x19, 4047 x 1226mm

(image for) Grating, h 30mm 19x19, 4047 x 1226mm
Grating, h 30mm 19x19, 4047 x 1226mm
(image for) Grating, h 30mm 19x19, 4047 x 1226mm
Grating, h 30mm 19x19, 4047 x 1226mm
(image for) Grating, h 30mm 19x19, 4047 x 1226mm
  • Model: 30/19x19 4047 x 1226
  • Shipping Weight: 300 lbs

€483.07

Units:  5
Add to Cart:
4047 x 1226mm
  • Type: Cast molded grating. ( TWS = GRP = FRP = GFK )
  • Material: Isophtalic resin reinforced with fiberglass rovings
  • Color: Similar to the one specified in the RAL palette
  • Chemical Resistance: - According to the Merim chemical resistance chart
  • - Chemical resistance depends on the type of resin used
  • Tolerances: - Length and width: +2 / -4 mm
  • - Height: +2 / -2 mm
  • - Weight: 19 kg/m2 +/- 10%
  • - Warping: < 10 mm / mb
  • Structure: - Mold - high quality Isophtalic resin
  • - Surface - Concave
  • - Resin content: - about 60%
  • - Glass content: - about 40%
  • Fire Resistance: - Self-extinguishing according to DIN EN 13501-1
  • - Classification in accordance with EN 13501-1 level Bfl-S1
  • Anti Slip: - Class: 30,5 ° - R 12 according to BRG 181 and DIN 51130
  • Other: - Standard operating temperature range: - 40 C / + 80 C
  • - Maximum operating temperature range: - 100 C / + 155 C
  • - resistance to UV radiation
  • - Good electrical insulator - does not conduct electricity
  • - Good thermal insulator - does not conduct heat
  • Technical Data Sheet
  • IFR - Isophtalic Fire Resistant
  • IFR 30/19x19/7x5 - Concave
  • In accordance with the standards: EN ISO 14122-2: 2016 and DIN 24537-3, the following is adopted:
  • The minimum loads to be considered for walkways and working platforms are as follows:
  • - 2.0 kN / m2 with a uniform load on the structure;
  • - 1.5 kN with a concentrated load applied in the most unfavorable place on a floor area of 200 mm x 200 mm.
  • The deflection of the floor surface after applying the load assumed in the design should not be greater than 1/200 of the span of the supports.
  • The difference in height between the loaded floor surface and the adjacent unloaded floor surface should not exceed 4 mm.
  • If the deflection is 1/200> 4mm, it is recommended to use a connector.
  • According to BGI / GUV-I 588-1, the minimum support of the grating should be equal to the height of the grating, but not less than 30 mm

    • This product was added to our catalog on Saturday 04 February, 2023.

    (image for) Säiliöt 10 - 2000 m3

    Languages

    (image for) Suomi  (image for) English  

    More Information

    Copyright © 2024 Maatilatukku.fi. Developed by Nlinksolution