K20 long-burning wood boiler

(image for) K20 long-burning wood boiler
K20 long-burning wood boiler
(image for) K20 long-burning wood boiler
K20 long-burning wood boiler
(image for) K20 long-burning wood boiler
K20 long-burning wood boiler
(image for) K20 long-burning wood boiler
K20 long-burning wood boiler
(image for) K20 long-burning wood boiler
K20 long-burning wood boiler
(image for) K20 long-burning wood boiler
K20 long-burning wood boiler
  • Model: K20
  • Shipping Weight: 300 kg

€2,070.00

K20 long-burning wood boiler – a new type of wood boiler

  • A hassle-free and reliable long-burning wood boiler for backup, emergency and main heating systems: heating an accumulator tank, thermal storage or radiator network, for permanent or occasional use.
  • Excellent especially when a large accumulator tank or thermal storage cannot be used.
  • The boiler's large chamber is filled with wood and the stack burns in a controlled way from the top down.
  • Max. output 20 kW
  • CE marked
  • The boiler is tested and certified according to EN 303-5:2012 and meets class 5.
  • The boiler is manufactured according to ISO 9001 and ISO 14001.
  • Efficiency up to 86%.
  • Dimensions: D 580 mm x H 1900 mm
  • Recommended for buildings under 150 m²
    Unrivalled boiler features:
    1. Efficiency 86%
    2. Heats up quickly and runs unattended for a long time
    3. Self-regulating without electronics or electricity
    4. Extremely reliable
    5. Designed for connection to modern heating systems
    6. Economical and burns many fuels
    7. Completely silent
    8. Easy to maintain

    The boiler's operating principle is ingenious!
    The long-burning wood boiler is a top-burning boiler in which the fire progresses from the top down. The boiler has 2 steel cylinders forming a 20 mm water jacket plus an insulated outer shell. At the top of the cylinder is the supply air valve, immediately followed by the air heating chamber. The upper door is for loading and lighting the wood. The lower door is for removing ash.
    The heated supply air is fed through the telescopic pipe to the fire. The fire moves downwards and always receives heated supply air through the telescopic pipe, which descends as the fire burns down.

    This shape of heat exchanger is the best possible – all the heat is transferred to the water.
    The boiler is loaded full once; wood must not be added during burning. A burn lasts 12–24 hours (36 hours with briquettes) depending on the heat demand. The boiler does not burn wood unnecessarily, only as needed. This is important when choosing a boiler – the bigger the boiler, the less often it needs loading.

    The supply air valve controls the combustion air according to the boiler water temperature: as the temperature approaches the set temperature, the valve reduces the air supply; when the temperature exceeds the set temperature, the valve closes the air supply and the boiler starts to cool. The supply air stops in the heating chamber and becomes hot, because the combustion zone below it is still hot. Without fire the boiler water cools quickly and the supply air valve opens. The hot supply air easily rekindles the embers.
    In practice the valve rarely closes completely; the control responds quickly to heat consumption – for example, hot water use makes the boiler increase its output almost immediately. The whole process works by itself, thanks to the ingenious design of the boiler.

    A power cut is not dangerous for this boiler if the pipes are large enough – the heating system can work by gravity circulation.

    Using an accumulator tank

    From the heating system's point of view, the long-burning boiler is close to an oil or pellet boiler because combustion adapts to the heat demand, so a large thermal storage tank is not needed. A storage tank does, however, improve efficiency; the recommendation is 20 L per kW of output. A cost-effective solution is to combine the thermal storage and the domestic hot water tank in one tank – a storage tank with a hot water coil or a heat exchanger package. The boiler works naturally with the tank: the long-burning boiler maintains its temperature, and when it drops below the set point the boiler raises it again for as long as the wood lasts – which also makes it possible to have hot water in summer without electricity.
    The long-burning boiler was developed in Lithuania more than 15 years ago. The boiler type is CE approved. In Finland we have supplied long-burning wood boilers to our customers since 2010, and all owners have been satisfied with this ingenious solution. The K20 long-burning wood boiler is safe and easy to maintain. It can be installed in new and old houses, and as part of a hybrid heating system.

    Supply air fan

    A fan can be used with the long-burning boiler in problem situations such as poor draught or damp wood. The fan should always be used when the chimney draught is poor or the combustion process needs more air.
    Example: burning wood with more moisture than expected. Wetter wood needs more air to burn, so the fan helps in this case. Note! In normal use the fan is not switched on.

    Technical data:

  • Efficiency 86%
  • Recommended boiler water temperature 70 °C
  • Water volume 35 l
  • Boiler water flow – 400 l/hour
  • Firewood capacity 48 kg
  • Max. log length 45 cm
  • Chimney connection D 180 mm
  • Pipework 1"
  • Fuel: firewood and various fuel briquettes.
    The boiler is approved and certified (Cert No 0662/0288/05) for use on a concrete floor without a base. If the boiler room does not have a concrete floor, or the floor is tiled for example, a concrete base is available as an accessory.
  • The boiler is a safe choice when you want to be sure that the radiators are warm in the morning too.

    In the diagram:
    1. Fan
    2. Air valve
    3. Air inlet
    4. Control valve for the air inlet valve
    5. Flow connection
    6. Air heating chamber
    7. Flue connection
    8. Lifting cable for the air distributor
    9. Changeover handle (wood/coal)
    10. Fuel loading doors
    11. Air distributor
    12. Firewood
    13. Hook for the lifting cable
    14. Ash removal door
    15. Grate (accessory)
    16. Grate support
    17. Return connection
    18. Air supply pipe (telescopic pipe)
    19. Safety valve

This product was added to our catalog on Saturday 14 November, 2026.

Copyright © 2026 Maatilatukku.fi. Developed by Nlinksolution
(image for) Kotituli